i'm just wondering if the soft piece on the front of the bolt has to be perfectly matching with the bolt under it. i noticed mine got a lil twisty contorted today? just makin sure its just norm, though i'm pretty sure it wouldnt affect the air flow and consistency
i'm just wondering if the soft piece on the front of the bolt has to be perfectly matching with the bolt under it. i noticed mine got a lil twisty contorted today? just makin sure its just norm, though i'm pretty sure it wouldnt affect the air flow and consistency
Brent, I am not exactly sure what you are talking about. Can you clarify a little bit? I believe the answer to your question is No, but I want to make sure I know what you are talking about.
Tracy your gun should not have loader speed as a setting. If you have 2.2 software on it the setting was changed from loader speed to paint type. If it still has loader speed then you might not have 2.2 software. Check it by going into the information screed and scrolling until you find it. If it is still 2.0, or 2.1 then we need to upgrade you asap. It only takes about 5-10 minutes and is easyily done.
is it going to make a difference that ill be shooting high pressure through the gun until i get me a low pressure tank i mean what will it do will it make the gun shoot harder or what and what will i have to do to get it to shoot right if it does do something
The reg on the Angel runs at about 400-500psi, a low pressure tank puts out anywhere from 400-500psi so there is no problem. A high pressure tank is 450-850. So you can put a high pressure tank on your gun and if your reg holds it at about 450 you will be ok. But if it gets overwhelmed and there is too much pressure its going to blow your solenoid. So if you HAD to use hp, (I wouldn't recommend it) but 1 time probly won't hurt your gun.
Haha, you may be able to use hp on it for the whole time you own your gun. Orrrr you may use it once and it will blow, you may use it twice before it blows, etc. Its just a gamble. That makes it your call to use it or not.
Gentelmen the regulator is not designed to handle that much air pressure. The mini reg on your gun has to regulate the air down to 270 psi into the selonoid. It just makes the job of the mini reg easier if the output of your tank is only 450psi. In case you dont know the mini reg is in the forgrip of your gun.
Have you adjusted the magnet? Also keep in mind that no matter how adjusted the trigger and settings are you still may experience bounce. As long as the gun is not noticably adding shots during rapid fire I would think you will be able to use it like it is. But try the magnet first.